Jump Starters

CTEK 12V jump starters and portable battery boosters deliver safe, spark-free starting power for flat batteries in cars, motorcycles, SUVs, boats, and commercial vehicles. Choose between high-output lithium jump starters (RB 1500, RB 2000, RB 3000, RB 4000 with up to 4000 A peak current) for instant engine starts, or the CS FREE adaptive booster that safely revives dead 12V batteries within 15 minutes without a wall outlet.

Showing 7 product(s)
Showing 7 product(s)
Learn more Learn more
Learn more Learn more
Learn more Learn more
Learn more Learn more
Learn more Learn more
Learn more Learn more
Learn more Learn more
Black Deals 1080x1920 All Offers   No Text Black Deals 1080x1920 All Offers   No Text

Black Deals

Ends Nov 30 2026

*Discounts are applied in checkout. Offers cannot be combined.

What you need to know about 12V car jump starters

A portable 12V jump starter provides immediate, self-contained starting power when a car battery is too depleted to crank the engine—eliminating the need for jumper cables or a second vehicle. Modern vehicles rely on dozens of electronic control units (ECUs) and Start/Stop systems that can be damaged by sudden voltage spikes, making a smart, protected jump starter essential for safe roadside recovery.

CTEK’s jump starter range is compatible with all 12V lead-acid car batteries (WET, MF, Ca/Ca, AGM, EFB, and GEL) as well as 12V lithium-ion (LiFePO4) starter batteries:

  • CTEK RB Series (RB 1500, RB 2000, RB 3000, RB 4000): High-output lithium jump starters delivering 1500 A to 4000 A peak current for instant engine starts in temperatures from -20°C to +50°C.
  • CTEK CS FREE (Adaptive Booster): Uses intelligent Adaptive Boost technology to safely analyze and charge a flat 12V battery within 15 minutes without high-current surges—protecting sensitive vehicle electronics and supporting off-grid solar charging.

Jump starter vs. jumper cables vs. battery charger

Drivers often confuse emergency starting tools with maintenance equipment, though each serves a distinct role in battery care:

  • Portable Jump Starters: Deliver immediate high-amperage power from an internal lithium battery to start a dead car within seconds. Safe, compact, and independent of external power sources.
  • Traditional Jumper Cables: Require a donor vehicle and carry a high risk of sparking, reverse-polarity errors, and voltage spikes that can damage modern vehicle electronics.
  • Smart Battery Chargers: Restore 100% battery capacity gradually over several hours using multi-step charging curves. After using any jump starter, you should connect a smart charger (such as the CTEK MXS 5.0 or CS ONE) to fully recharge the battery and prevent premature failure.

How to jump-start a car safely with a portable jump starter

Step 1: Prepare the vehicle and jump starter
Turn off the vehicle's ignition, lights, and accessories. Check the jump starter’s LED indicator to verify it has sufficient charge, and inspect the vehicle battery terminals for white or greenish corrosion—cleaning them with a wire brush if needed for solid electrical contact. Place the unit on a flat, stable surface away from moving belts and fans.

Step 2: Connect the clamps safely
Attach the red positive (+) clamp to the battery’s positive (+) terminal. Next, connect the black negative (-) clamp to a clean, unpainted metal ground point on the vehicle chassis rather than directly to the negative battery post. Using a chassis ground prevents interference with modern Battery Management Systems (BMS). Once connected, CTEK’s built-in safety circuitry checks polarity automatically before enabling power.

Step 3: Start the engine and disconnect
Turn the ignition key or press the start button. If the engine does not start immediately, wait at least 30 seconds before trying again so the unit can cool and vehicle electronics can reset. Once the engine runs, let it idle for a few seconds so the alternator takes over, then remove the clamps and recharge your jump starter so it is ready for future emergencies.

Which CTEK jump starter fits your car or vehicle?

Choosing the right jump starter depends on your engine displacement (liters), fuel type, and vehicle size:

  • RB 1500 (1500 A Peak Current): Compact glovebox jump starter for everyday cars and motorcycles (up to 6L petrol / 3L diesel), delivering up to 20 starts per charge plus an 8,000 mAh USB powerbank.
  • RB 2000 (2000 A Peak Current): Extra cranking reserve for mid-size cars, crossovers, and powersports (up to 25 starts per charge) with a 10,000 mAh USB powerbank.
  • RB 3000 (3000 A Peak Current): High-power jump starter for larger SUVs, pickups, vans, and campers (up to 8L petrol, up to 30 starts per charge) with a 16,000 mAh USB powerbank.
  • RB 4000 (4000 A Peak Current): Heavy-duty jump starter for large V8 petrol engines (up to 10L), heavy diesel engines (up to 8L), fleets, and workshops (up to 45 starts per charge) with a 24,000 mAh USB powerbank.
  • CS FREE (Adaptive Booster & Maintainer): Portable 12V jump starter, adaptive charger, and solar-ready powerbank that safely revives flat car batteries in 15 minutes without voltage spikes.

Are portable lithium jump starters safe to keep in your car?

Yes. CTEK lithium jump starters are engineered with thermal management systems that operate safely in extreme cabin and outdoor temperatures from -20°C to +50°C, holding their standby charge for 6 to 8 months between uses. Spark-proof clamps, reverse-polarity protection, short-circuit safeguards, and regulated voltage output ensure complete safety for both the driver and modern vehicle electronics, while integrated USB-A/USB-C ports and multi-mode LED flashlights add roadside emergency utility.

Jump Starters - CTEK Jump Starters - CTEK