Benzina Stables uses CS ONE to Keep Vehicle Batteries Ready To Drive

Case Study | Battery Charging

CTEK, a leading global brand in vehicle charging solutions, has launched the CS ONE, a revolutionary and powerful new battery charger and maintainer with cutting-edge APTOTM (Adaptive Charging) technology that does all the thinking for you.  

The team at Benzina Stables, a highly secure car storage facility in Preston, Melbourne, have been using the CS ONE on their beloved vehicles amongst all the routine maintenance checks and processes they undertake at the facility. 

Battery Management  

Benzina Stables holds a large variety of vehicles under management – with everything from an old Rolls-Royce Phantom VI to Land Rover Defenders, Ferraris, Mustangs and more – so the team needs to know they have the right tools to meet the needs of every customer.  

Amongst all the maintenance processes the team undertake, one critical factor is keeping every car on a battery charger and maintainer, like the CS ONE.  

One of the deciding reasons why CTEK was chosen for their everyday battery maintenance needs is because CTEK chargers are spark proof, reverse polarity protected and electronically safe. With millions of dollars of 4x4s, classic collectables, exotics and motorbikes, the risk of fire is a big consideration.  

“Before using CTEK chargers, we used to spend 20 minutes at the start and end of each day, turning each vehicle’s charging connection on and off again. When you’re in our business – time is money and each minute is important,” said Kristian Palumbo, Co-Founder of Benzina Stables.  

”With our CTEK chargers, we can simply connect and forget. They are widely-recognised as reliable and safe, dramatically reducing the chances of a fire and a costly insurance bill. They are left switched on at night, and we sleep very comfortably knowing expensive cars are in here and they are being taken good care of”. 

Charging and Reconditioning with the CS ONE  

”Recently, we got our hands on a CTEK CS ONE charger – from the get go, it was a game-changer for us. We deal with a broad cross section of vehicles here, from exotics to classic cars and batteries are often placed in weird and hard-to-reach places, tucked into the back of a Ferrari, for instance. Previously, we had to get a torchlight shone in via a phone, and struggle to locate the positive and negative terminals to connect, but the CS ONE’s polarity free clamps makes this issue a thing of the past. We just put one clamp on each charging point and the CS ONE will automatically work out which is the positive and which is the negative terminal. It also automatically adapts to lead-acid or lithium batteries, whereas with many other chargers we’d have to manually choose a lithium mode, for example. When dealing with many different types of cars and batteries, this is a great feature! With the CS ONE’s mobile app connectivity feature as well, we can monitor the vehicle’s charging cycle progress from anywhere. We fight over which car gets it!”  

With a wide mix of cars, all utilised on an irregular basis, Kristian and his team know that it’s essential to not just ensure the batteries are charged, but that they are carefully maintained to care for their long-term performance. 

”We often get cars that have sat in sheds or storage units for a long time. Batteries come to us that have been in very poor health. It’s great to know that CTEK chargers such as the MXS5.0 and the CS ONE gives us the ability to efficiently restore them to good condition for our customers. Its a great offering for the customer and a value-add for us,” said Kristian. 

benzina-2.jpg

The CTEK CS ONE features: 

  • Super Smart and Super Simple: no buttons to press or modes to select – simply connect CS ONE to any 12V lead-acid or lithium (LiFePO4) battery and just leave it to do its work. 
  • Adaptive Charging Technology (APTOTM): automatically works out what type and size of battery you’ve got and what it needs, then delivers a customised charging program with the most appropriate charge for your battery. More on APTOTM below.  
  • Polarity Free Clamps: just put one clamp on each charging point and the CS ONE will automatically work out which is the positive and which is the negative terminal.  
  • Bad cell detection: The CS ONE can tell if your battery can’t be charged – and will notify you.  
  • Easy to understand display: countdown indicator shows when you can restart your battery and how long to go till fully charged. 
  • Additional functions: unlock additional programs / functions by connecting the CS ONE to the free to download CTEK App: 
    • RECOND mode restores battery life and reconditions flat or deeply discharged batteries 
    • WAKE UP lithium batteries with under voltage protection (UVP) or to bring deeply discharged lead-acid batteries (as low as 0V) back to life 
    • SUPPLY’ mode turns CS ONE into a 12V power supply to keep vehicle settings safe if you need to remove the battery 
    • Advanced settings to monitor volts and amps being delivered by the charger  
    • Adjust charger LED brightness                              
  • Accessories: new-look u-terminal connector for easier access to the battery, protective rubber bumper, wall-mount and adaptor for compatibility with all existing CTEK accessories.

 

Delivering The Best 

For the team at Benzina, CTEK fits into its larger mission to ensure that their customers know that they’re getting the absolute best when they hand their keys to the team. The crew loves every opportunity to bring new customers in and help them enjoy their special cars and motorcycles to the fullest. 

“We’re making sure that each vehicle leaves here better than it arrived. We have such an awesome customer base and it’s amazing to have the opportunity to create this culture and grow a network of motoring enthusiasts.” 

CS ONE, 40-330 | ctek.com CS ONE, 40-330 | ctek.com CS ONE, 40-330 | ctek.com CS ONE, 40-330 | ctek.com CS ONE, 40-330 | ctek.com CS ONE, 40-330 | ctek.com CS ONE, 40-330 | ctek.com

CS ONE

12V | Revolusjonerende adaptiv batterilader og vedlikeholder