MXS 3.8 AUS

The MXS 3.8 is an advanced battery charger and maintainer. It has selectable programs for use on different sized batteries and special programs for desulphation, and charging on cold days.

Description

12V | Automatic maintenance charger for car and motorcycle batteries

The MXS 3.8 microprocessor controlled 7 step battery charger and maintainer is suitable for batteries from 1.2Ah-85Ah. Features include battery diagnosis to establish whether your battery can receive and retain a charge, a patented desulphation program and a ‘Snowflake’ program for charging on cold days. It also includes selectable programs for charging smaller and normal batteries. The MXS 3.8 uses CTEK’s patented float/pulse system, which is the most efficient maintenance mode when a battery is connected for long periods. The MXS 3.8 is simple to use and you can follow the whole charging process on the clear, easy to read display.

Features

Maintains batteries up to 130Ah
Splash and dust proof (IP65)
Safe spark free operation
Short circuit proof
Fully automatic ‘click and connect’ 7 step charging
Smaller battery, normal battery and cold weather programs
Charges batteries up to 85A
Reverse polarity protected
5-year warranty

MXS_3.8-manual-low-AU-EN.pdf

Charging categoryAC charging
Input220–240 VAC, 50–60 Hz, 0.5 A
Output14.4 /14.7 V, 3.8 A
Battery chemistryLead acid
Battery types12 V:; WET; MF; Ca/Ca; AGM; GEL
Battery capacity1.2–130 Ah
Back current drain*Corresponding to less than 1 Ah/month
Battery voltage12 V
Ambient operating temperature-20 ˚C to +50 ˚C
Start voltage2.0 V
Ripple**Less than 4 %
Degree of protectionIP65
Warranty5 years
DisclaimerAll products and product specifications are subject to change without notice, to improve reliability, function or design. In the event of product error, we reserve the right to inspect the product and verify the fault. All product returns are subject to our standard warranty terms.

*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.

>

MXS_3.8-manual-low-AU-EN.pdf

Connect with CTEK on Socials

Are you interested in learning more about the CTEK brand, maximizing battery performance or sustainable charging? Follow us on @ctekcharging for inspiring updates and the latest news on our products and battery management solutions.