MXT 4.0 AUS

The 8 step charger that’s ideal for smaller 24V batteries and maintenance charging for fleets with 24V vehicles.

Description

24V | Provides easy charging for 24 V batteries

The MXT 4.0 is a cost effective 8 step charger that delivers 4A to 24V batteries from 8-100Ah and is suitable for maintenance charging up to 250Ah. It can also be used in applications such as back-up systems, piste machinery, industrial cleaning machinery and wheelchairs. The MXT 4.0 features battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for restoring and reconditioning stratified and deeply discharged batteries, an optimised cold charging mode and an AGM battery charging mode.

Features

Charges 24V batteries from 8-100Ah
Patented maintenance charge for longer battery life
Recond program
Comes with Connect – Eyelet and Connect – Clamp connectors
Splash and dust proof (IP65)
Fully automatic ‘connect and forget’ 8 step charging
Can be used as a power source
Easy to read LED display
Safe spark free operation
Reverse polarity protected
Short circuit proof
2-year warranty

MXT_4.0-manual-low-AU-EN.pdf

MXT_4.0-safetyinstruction-low-AU-EN.pdf

Charging categoryAC charging
Input220–240 VAC, 50–60 Hz, 1.2 A
Output28.8/29.4/31.4 V, 4.0 A
Battery chemistryLead acid
Battery types24 V:; WET; MF; Ca/Ca; AGM; GEL
Battery capacity8–250 Ah
Back current drain*Corresponding to less than 1 Ah/month
Battery voltage24 V
Ambient operating temperature-20 ˚C to +50 ˚C
Start voltage2.0 V
Ripple**Less than 5 %
Degree of protectionIP65
Dimensions (L x W x H)191 x 89 x 48 mm
Net weight (unit with cables)0.8 kg
Warranty2 years
DisclaimerAll products and product specifications are subject to change without notice, to improve reliability, function or design. In the event of product error, we reserve the right to inspect the product and verify the fault. All product returns are subject to our standard warranty terms.

*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.

>

MXT_4.0-manual-low-AU-EN.pdf

MXT_4.0-safetyinstruction-low-AU-EN.pdf

Connect with CTEK on Socials

Are you interested in learning more about the CTEK brand, maximizing battery performance or sustainable charging? Follow us on @ctekcharging for inspiring updates and the latest news on our products and battery management solutions.