MXTS 70/50 EU-K

The MXTS 70/50 is a powerful, state of the art workshop charger developed specifically for all 12V and 24V lead acid batteries, including AGM and EFB Stop/Start types.

Description

12V | 24V | Workshop charger for 12V and 24V lead acid batteries

The MXTS 70/50 is a fully automatic 8 step charger that delivers selectable 50A/12V or 50A/24V to batteries from 20-1,500Ah (for 12V) and 20-1,500Ah (for 24V), with 50A of constant power supply in 12V and 24V mode. In 12V mode, up to 70A of power is automatically available for temporary high loads. Features include battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for reconditioning deeply discharged batteries and a built in temperature sensor for optimised charging.

Features

Fully automatic 8 step charging
Selectable modes for optimal battery size adaptation.
Patented desulphation function
Temperature sensor for optimised charging
Heavy duty aluminium housing (IP20 classified)
Compatible with Pro accessories.
Safe spark free operation
Reverse polarity protected
Short circuit proof
2-year warranty

MXTS_70_50-manual-low-UK-EN.pdf

MXTS_70_50-productsheet-low-UK-EN.pdf

Charging categoryAC charging
Input220–240 VAC, 47–64 Hz, 7.2 A
Output14.4 V, 50 A
Battery chemistryLead acid
Battery types12 V:; 24 V:; WET; MF; Ca/Ca; AGM; GEL
Battery capacity20–1500 Ah
Back current drain*Corresponding to less than 1 Ah/month
Battery voltage12 V; 24 V
Ambient operating temperature-20 ˚C to +50 ˚C (- 4 °F to +122 °F)
Start voltage2.0 V
Ripple**Less than 4 %
Degree of protectionIP20
USBThe USB port is used for downloading charge program parameters from a PC by a technician or skilled user but not end user.
Warranty2 years
DisclaimerAll products and product specifications are subject to change without notice, to improve reliability, function or design. In the event of product error, we reserve the right to inspect the product and verify the fault. All product returns are subject to our standard warranty terms.

*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.

MXTS_70_50-manual-low-UK-EN.pdf

MXTS_70_50-productsheet-low-UK-EN.pdf

Connect with CTEK on Socials

Are you interested in learning more about the CTEK brand, maximizing battery performance or sustainable charging? Follow us on @ctekcharging for inspiring updates and the latest news on our products and battery management solutions.