D250TS

Make sure your 24V service batteries are getting the optimal charge and the consumers are supplied quickly and safely while driving.

Description

24V | For heavy vehicles.

The D250TS is a fast, fully automatic, 4-step DC/DC battery charger and battery separator for vehicles with dual 24V battery banks. D250TS is ideal for busses and trucks, recreational vehicles and boats. It supplies 10A to 24V batteries of 28-200Ah with a 12V output for equalising the starter battery and supply of 12V equipment connected to the starter battery. D250TS is IP65 classified for outdoor use, suitable for all types of lead acid batteries, including Wet, MF, EFB, Ca/Ca, AGM and Gel. Fitting the D250TS will give you the confidence that your batteries are always at the optimum charging voltage

Features

Quick installation time at a lower cost
Takes charge automatically from any power source connected to it
Automatic battery equalisation of 24 V systems
Input voltage, 14-30V DC
Output: 28.8V/10A, 14.4/10A

D250TS-manual-low-UK-EN.pdf

D250TS-productsheet-low-UK-EN.pdf

Charging categoryDC charging
Input14–30 V
Output28.8 V, 10 A
Battery chemistryLead acid
Battery types24 V:; WET; MF; Ca/Ca; AGM; GEL
Battery capacity28–200 Ah
Back current drain*Corresponding to less than 1 Ah/month
Battery voltage24 V
Ambient operating temperature-20 ˚C to +50 ˚C
Ripple**Less than 4 %
Degree of protectionIP65
Warranty2 years
DisclaimerAll products and product specifications are subject to change without notice, to improve reliability, function or design. In the event of product error, we reserve the right to inspect the product and verify the fault. All product returns are subject to our standard warranty terms.

*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.

D250TS-manual-low-UK-EN.pdf

D250TS-productsheet-low-UK-EN.pdf

Connect with CTEK on Socials

Are you interested in learning more about the CTEK brand, maximizing battery performance or sustainable charging? Follow us on @ctekcharging for inspiring updates and the latest news on our products and battery management solutions.