MXTS 40 UK

MXTS 40 is the essential tool for 12V and 24V vehicle workshops. Easy to use, hard wearing and safe for fast and accurate diagnostics, repair and reprogramming.

Description

12V | 24V | All-in-one 12V and 24V battery tool for the professional workshop

MXTS 40 has a selectable, dual voltage power supply, each with incremental output voltage settings in steps of 0.4V (12V setting) or 0.8V (24V setting). Its steady, accurate voltage settings mean complex diagnostic, repair and reprogramming procedures can be carried out quickly and safely without fear of damage to sensitive vehicle electronics MXTS 40 has automatic parallel load compensation which makes sure that power supply voltage and amperage are always constant and correct, even if the battery has an additional load placed on it. Coupled with fast, fully automatic 8-step charging and temperature control for all weather conditions, MXTS 40 is the all-in-one 12V and 24V workshop battery support, charging and maintenance tool.

Features

Up to 40A (12V) and 20A (24V) battery support
Power supply with selectable output in steps of 0.4V (12V) or 0.8V (24V)
Multilingual, easy to read LCD display
Fast, fully automatic 8-step charging
Dedicated programs for normal, AGM and Ca/Ca batteries
‘BOOST’ program to recondition deeply discharged lead-acid batteries
Charger type: 8-step, fully automatic charging cycle
Battery type: normal 12V and 24V, MF, Ca/Ca, AGM, GEL
Low 2V start up voltage for charging
Automatic parallel load compensation
Extremely low ripple
Automatic temperature compensation
Degree of protection: IP20
Warranty: 2 years
Accessories: optional TROLLEY PRO and WALL HANGER PRO mounting kits, 5 meter DC cable

MXTS_40-manual-low-UK-EN.pdf

MXTS_40-broschure-PRO-Ignite-UK-EN.pdf

MXTS_40-productsheet-low-UK-EN.pdf

Charging categoryAC charging
Input220–240 VAC, 50–60 Hz, 3.0 A
Output14.4 V, 40 A/12 V or 20 A/24 V
Power SupplyMax 40A/20A; Selectable output in steps of 0.4V, from 13.6V to 14.8V (12V setting) and in steps of 0.8V from 27.2V to 29.6V (24V setting).
Battery chemistryLead acid
Charging Voltage12V: 14.4V/14.7V/15.8V 24V: 28.8V/29.4V/31.6V
Battery types12 V:; 24 V:; WET; MF; Ca/Ca; AGM; GEL
Battery capacity12 V: 20–1200 Ah, 24 V: 10–600 Ah
Parallel LoadAutomatic
Back current drain*Corresponding to less than 1 Ah/month
Battery voltage12 V; 24 V
Ambient operating temperature-20 ˚C to +50 ˚C (- 4 °F to +122 °F)
CoolingFan
Start voltage2.0 V
Ripple**Less than 4 %
Temperature compensationTemperature compensation and battery reconditioning functions.
Degree of protectionIP20
Gross weight (unit in box)3.7 kg
Dimensions (L x W x H)254 x 160 x 76 mm
Net weight (unit with cables)1.3 kg
User interfaceLCD graphical display; Multilingual, easy to read
Warranty2 years

*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.

MXTS_40-manual-low-UK-EN.pdf

MXTS_40-broschure-PRO-Ignite-UK-EN.pdf

MXTS_40-productsheet-low-UK-EN.pdf

All-in-one 12V and 24V battery support for the professional workshop

With selectable dual voltage power supply, incremental output settings for 12V and 24V batteries, fully automatic 8-step charging and temperature control for all weather conditions, MXTS 40 is the all-in-one battery support, charging and maintenance tool for the workshop.

Constant, accurate voltage settings mean complex diagnostic, repair and reprogramming procedures can be carried out quickly and safely without fear of damage to sensitive vehicle electronics.

Why you need CTEK battery support

Battery support is an essential tool for all types of diagnostic, service and repair work in the modern workshop. Any work on any vehicle demands a constant, reliable power supply – if the voltage dips, sophisticated diagnostic, repair or update programs can fail and could also damage the vehicle’s ECUs. That’s a frustrating, time consuming and potentially very expensive situation to be in.

Like all CTEK PRO Series products, MXTS 40 has automatic parallel load compensation which makes sure that power supply voltage and amperage are always constant and correct, even if the battery has an additional load placed on it during diagnostic work.

CTEK’s MXTS 40 is the all-in-one battery support tool that will save your workshop time and money.

Dual voltage power supply
Selectable 12V and 24V power supply with constant support voltage to avoid damage to the vehicle’s ECUs and other sensitive electronics.

Fully automatic 8-step charging
Simple, easy to read graphic display shows you what stage MXTS 40 has reached in the charging cycle.

Selectable output voltages
In ‘SUPPLY’ mode, incremental output voltages can be selected in both 12V and 24V settings to comply with manufacturers’ minimum service voltages.

Automatic temperature compensation
Temperature sensor can be fixed inside the positive clamp or as close to the battery as possible. It automatically adjusts the voltage to the ambient temperature in conditions between -20°C and +50°C (-4°F to +122°F), reducing the risk of over- or under-charging.

Tough, safe and reliable
Detachable, heavy duty 2.5m charging cables with optional 5m replacement cables. IP20 rated, short circuit proof and comes with a 2-year warranty.

Connect with CTEK on Socials

Are you interested in learning more about the CTEK brand, maximizing battery performance or sustainable charging? Follow us on @ctekchargers and @ctekemobility for inspiring updates and the latest news on our products and battery management solutions.